Marker machines and laser marking: what they are and how they work

You can learn about the basics of Lasermarker in this article if you’re wondering what it’s all about. There are many different ways to mark with lasers, such as engraving, carbonizing, foaming, staining, and removing. Knowing which machine to choose can be confusing when choosing the method that is best for your application. There are a variety of devices available that are designed for specific purposes.

Aspects of Surfaces

As with other surface techniques, including printing and hot-branding, Marcatore laser marking is very similar. The primary difference is the type of tool used. The machine consists of three main parts: a laser that draws patterns on the surface, a controller controlling the spread and movement of the beam, and the material to be marked. It will vary depending on the type of surface on which the marking will be done, whether it is plastic or metal.

Applications of laser marking

For laser marking applications, the fibre laser marking machine is a popular choice. With this machine, a wide range of materials can be processed and permanent marks can be produced. Automobile keys, keyboards, home appliance panels, optical cables, and more are a few examples of typical applications. Various materials can also be marked with fibre lasers. It can be used for serial numbers, part numbers, barcodes, graphics, and other data that can be read by machines.

Marks of excellence

Compared to other marking methods, laser light beams offer several advantages. They are highly automated and produce accurate results quickly. They also produce durable, high-quality marks that are contamination-free. You can easily create small, complex, and custom objects with this tool. Furthermore, it is an essential component of Smart Factory manufacturing, in which every detail is crucial. The speed and accuracy of this machine make it an excellent choice for almost any application.

Materials Other Than Metals

Nonmetal materials can also be marked with lasers in addition to small parts. Small components, such as capacitors, crystal oscillators, and other electronics, are particularly effective with the fibre laser. These applications are well-suited to the laser’s high power and speed. Fiber laser marks, on the other hand, are highly durable and can be made to look just like any other type of material.

Computer software is used to operate fibre laser marking machines. When the computer is installed with the required drivers, you can draw your desired design. 

You can select the most appropriate power, speed, frequency, and hatch after drawing your plan on the software. You can use a practice machine to determine the size of the parking area if you want to test your machine on a metal plate.

The type of light

In laser marking, a laser is a type of light. Laser beams leave a sharp, uniform mark on surfaces. As a result of vaporizing the surface layer, the material undergoes a chemical or physical change. It is a powerful tool for industrial applications, but it can also be used to mark thin or thick materials.

Materials Variety

Lasers can be used to mark a variety of materials. Printing barcodes, alphanumeric serial numbers, logos, and more is possible using this technology. Furthermore, it can identify different materials, such as stainless steel, glass, and titanium. It shouldn’t matter what surface you mark as long as it’s not glass or wood.


What kind of material you can mark will depend on the type of laser you use. With a CO2 laser, you can observe metals, while with a fibre laser, you can observe nonmetals. You can either use fibre or CO2 lasers, depending on the type of material you want to celebrate. Ultimately, it would be helpful if you determined which one is best for your application, and it’s important to understand what kind of markings you’ll be doing with your new machine.

Leave a Reply

Your email address will not be published.